Bangladesh Army University of Science and Technology (BAUST), Saidpur

Department of Industrial and Production Engineering (IPE)

Publications

Selected Publications

Journal Articles

M. Ahasan Habib, Hiroki Keno, Ryota Uchida, Akihisa Mori and Kazuyuki Hokamoto, “Cladding of titanium and magnesium alloy plates using energy-controlled underwater three layer explosive welding”, Journal of Materials Processing Technology,  Vol. 217, pp.310-316, March 2015.

Md Hasan Ali, Robiul Islam Rubel, and Md Ariful Alam. “Time Series Long-Term Forecasting of Per Capita Electricity Consumption for Bangladesh.” ASM Science Journal, Vol. 16, 2021. (Scopus Indexed).

Palash Saha and Md Ariful Alam. “Smart Management Scheme for the Efficient Control of Industrial Inventory.” American Journal of Industrial and Business Management 12, no. 4 (2022): 519-30.

Md. Al Amin, Md. Rafiquzzaman*, Md. Ariful Alam, Radwan Ahmed Rahat1 and Rabiul Ahasan, Optimization of Design Parameters for Achieving Highest Impact Strength of Rice straw Based Polymer Composite Using Taguchi Method’International Journal of Emerging Engineering Research and Technology Volume 5, Issue 10, 2017, PP 22-29 ISSN 2349-4395 (Print) & ISSN 2349-4409 (Online).

Ahasan Habib, Liqun Ruan, Ryuji Kimura, P. Manikandan and Kazuyuki Hokamoto, “Cladding of titanium and magnesium alloy by explosive welding using underwater shockwave technique and effect on interface”, Materials Science Forum, Vol.767, pp.160-165, July 2013.

Ruma, M. Ahasan Habib, SHR Hosseini, T. Sakugawa and H. Akiyama, “Treatment of Wastewater by Underwater Discharge in Gas Bubbling Water”, International Journal of Renewable Energy and Environmental Engineering, Vol. 03, No. 03, pp. 189-194, July 2015.

Ruma, M. Ahasan Habib, RANIPET HAFEEZ BASHA, “A Survey of Non-thermal plasma and their generation methods”, International Journal of Renewable Energy and Environmental Engineering, Vol. 04, No. 01, pp. 006-012, January 2016.

Sudipa Sarker, M. Ahasan Habib, Md. Abdulla Al Masud and A.K.M. Masud, ” Application of QFD for Improving Customer Perceived Quality of Synthetic Fiber: A Case of Beximco Synthetics Ltd.”, Global Journal of Management and Business Research, Vol. 10(2), Ver. 1.0, pp. 120-128, April 2010.

BENJIR AHMED, M. AHASAN HABIB, SABUJ KHAN, SHANTONU KAISHER, RUMA, “Android Apps Controlled ROBO Car by Microcontroller using Bluetooth”, International Journal of Industrial Electronics, Control and Robotic ISSN 2231-4903, March 2018.

M AHASAN HABIB, RUMA, “Energy Calculation of Joining of Dissimilar Metals by Using Numerical Simulation Method During Underwater Explosive Welding Technique”, International Journal of Renewable Energy & Environmental Engineering, ISSN 2348-0157, Vol. 05, No. 04, pp. 122-127, October 2017.

M AHASAN HABIB, RUMA, TAIEBA TUBA RAHMAN, “Joining of Titanium and Magnesium by Conventional Explosive Welding Method and the Effect of Kinetic Energy”, International Journal of Renewable Energy & Environmental Engineering, ISSN 2348-0157, Vol. 05, No. 04, pp. 115-121, October 2017.

Ruma, M Ahasan Habib, M. N. Islam, S. H. R. Hosseini, H. Akiyama. “ Physical and Chemical Effects of Underwater Discharge with a Variation in Solution Conductivity and Input Voltage”, DUET Journal, Vol. 03, Issue 01, pp. 23-28, December 2017.

Nurunnabi, Kazi Nazmul Islam, Tamim Ahmed, Kazi Rakib Hasan Shuvo, Mohadab Chandra Roy, Salim Sadman, M. Ahasan Habib, “Efficiency Losses of a Modern Loom with Analytical Explanation”, Scholars Journal of Engineering and Technology (SJET), Vol. 06, Issue 05, pp. 147-161, May 2018.

M. Ahasan Habib, Mahbuba Zannat, Atiqure Rahman, Fahim Shahriar, Naseem Ahmed, “Identification and Reduction of Waste in an Industry (Ventura Leatherware Mfy Bd Ltd.) Using VSM (Value Stream Mapping) – A Case Study”, American Journal of Engineering Research (AJER), Vol. 10, Issue 05, pp. 224-232, May 2021.

Ruma, M Ahasan Habib, Mamun Sikder, “Generation of High Voltage Discharge Plasma for Wastewater Treatment”, International Journal of Advanced Research in Science, Engineering and Technology, Vol. 7, Issue 10, October 2020.


International Conference Proceedings

Md Ariful Alam , Md Rafiquzzaman, and Radwan Ahmed Rahat. “Impact of Fiber Orientation on the Mechanical Properties of Rice Straw-Glass Fiber Reinforced Polymer Composites.” Proceedings of the International Conference on Industrial Engineering and Operations Management, Istanbul, Turkey,  March 7-10, 2022. (Ebsco Indexed).

Md Firoz Kabir, Md Ariful Alam, and Rafat Mahmud Hridoy. “Plastic Recycling from Municipal Solid Waste in Jashore City of Bangladesh.” Proceedings of the 11th Annual International Conference on Industrial Engineering and Operations Management, Singapore, March 7-11, 2021. (Scopus Indexed).

Ahasan Habib, Akihisa Mori, S. Tanaka and Kazuyuki Hokamoto, “Explosive welding of titanium and magnesium alloy using conventional and underwater shockwave technique”, Proceedings of XII International Symposium on Explosive Production of New Materials: Science, Technology, Business, and Innovations (EPNM-2014), pp. 91-93, Cracow, Poland, 25-30 October, 2014.

Hridoy, Rafat Mahmud, Nourin Mohsin, and Md Ariful Alam. “Implications of Tpm in Domestic Based Ready Made Garments Industry in Bangladesh During Corona Pandemic: A Case Study.” Proceedings of the 11th Annual International Conference on Industrial Engineering and Operations Management, Singapore, March 7-11, 2021. (Scopus Indexed).

M. Ahasan Habib, Ryuji Kimura, P. Manikandan and Kazuyuki Hokamoto, “Explosive Welding of Titanium and Magnesium Alloy Using Interlayer”, The Proceedings of the 63rd Japanese Joint Conference for the Technology of Plastic, pp. 383-384, Kita Kyushu, Japan, 4-November, 2012.

M. Ahasan Habib, M. Abul Hashem, A.K.M. Masud, “High Quality Yarn Production Using QFD: Bangladesh Perspective”, International Conference on Mechancal, Industrial and Energy Engineering 2012, MIE 12-003, 01-02 February, 2013, Khulna, Bangladesh.

Notice